The ultimate in portability!

Comes with Brand New 3 Gallon Keg, Pocket Charger, Gas Disconnect (MFL), Liquid Disconnect (Barb), 4ft of 3/16" Beer Line, Picnic Tap, and ten 16 gram CO2 Cartridges.

Now you can take your homebrew anywhere with ease. You can transfer your already carbonated beer from a larger keg. If you have a CO2 system you can force carbonate in the keg. This can also be used for natural carbonation. Just boil half a cup of water, stir in 1/3 of a cup of dextrose (corn sugar/priming sugar), pour into your cleaned and sanitized keg, then transfer your finished beer from the fermenter to the keg. Leave about an inch and a half of headspace. Lock down the lid and leave at room temperature for about 3 weeks. Now one important suggestion if you are going to do it this way. The long dip tube in the keg goes to the VERY bottom to get every last drop out of the keg, if you naturally carbonate in the keg you will have considerable sediment that the tube will be sitting right in the middle of. So we recommend that you take the long tube out and cut an inch off the bottom (with a tubing cutter or dremel), this will keep the tube up out of the sediment for good clean pours.

Your kit comes with 10 CO2 cartridges, it has been our experience that one cartridge will serve the whole keg (but you may want to take a spare just in case). Extra cartridges are available HERE.

NOTE: The 2.5 gallon keg is shown in the picture above, but this system does come with the 3 gallon keg.