Rebel Brewer: Popular Products

Beer Line - 1/4" ID (by the foot)

Mon, 22 Dec 2008 20:17:54 +0000

Thick walled and crystal clear. 1/4" ID x 1/2" OD. Odorless and tasteless.
Can handle 70psi so it can be used for gas side or liquid side.
1/4" ID beer line is better for LONGER DRAWS. If you are looking for shorter
draws (ie, 3-4 ft, you should really be getting the

And what do you know? It's black.
Fits all standard beer faucets, and shows everyone that you don't need
all that flashy stuff, cause it's all about the beer, baby!

Price: $1.95

Tail Piece for Shank

Mon, 22 Dec 2008 20:47:52 +0000

Barbed fitting for beer line. Fits 3/16" or 1/4" Beer Line. Attaches to shank with Hex Nut.
Chrome plated brass.

Price: $0.95

Neoprene Washer for Tailpiece

Mon, 22 Dec 2008 20:51:35 +0000

Fits between the tailpiece and the shank. Keeps beer from leaking into your fridge. Yes, you need it.

Price: $0.35

Faucet Wrench

Wed, 11 Feb 2009 15:41:37 +0000

Red Handle EZ-grip faucet wrench for attaching your faucet to the shank.

Price: $3.95

Perlick All Stainless Faucet

Thu, 12 Mar 2009 16:15:57 +0000

If there has to be a "favorite" faucet, this is the one. The Perlick all stainless faucet is forward sealing,
so the lever mechanism never dries out or gets sticky. It has no brass to tarnish, it has no chrome to chip.
The spout screws off for easy cleaning. Fits all standard shanks a..

Price: $39.95

Complete Homebrew Kegging Kit

Sun, 29 Mar 2009 19:41:38 +0000

Now you can keg your homebrew!! One complete kit has all you need to enjoy draft beer at home.
Comes with:

Used 5 gallon ball-lock keg
Replacement O-rings for keg
5 lb CO2 tank (reconditioned/ships empty /Currently thi..
Price: $163.95

Squeeze Faucet (Thumb Tap)

Wed, 17 Dec 2008 19:52:30 +0000

For serving Draft Beer off of a keg. Fits 3/16" Beer Line (recommended for short runs) or 1/4" I.D. Beverage line (used for longer runs) or 5/16" Beer line (if you are running a line over to your neighbors house).
Comes apart for easy cleaning.

Price: $2.99

Ball Lock LIQUID Disconnect - 1/4" Barbed

Thu, 18 Dec 2008 18:20:44 +0000

This is the Black one. Fits the "Out" post on Ball Lock Kegs. 1/4" barb fits standard beverage tubing. Hose clamp recommended.

Price: $5.75

Pin Lock LIQUID Disconnect - 1/4" Barbed

Thu, 18 Dec 2008 18:30:05 +0000

Fits the 3-pin "Out" post on Pin Lock Kegs. 1/4" barb fits standard beverage tubing. Hose clamp recommended.

Price: $5.95